maker:listofsoftwareformakers
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
maker:listofsoftwareformakers [2014/05/27 00:39] Anibit [Libre Office] |
maker:listofsoftwareformakers [2015/05/24 07:25] (current) Anibit [HeeksCNC] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ~~NOCACHE~~ | ||
| ====== List of free software for Makers ====== | ====== List of free software for Makers ====== | ||
| Line 6: | Line 7: | ||
| Anibit staff tends to lean toward Microsoft Windows Desktops, and so this list may have somewhat of a bias, but many of the listed software is cross-platform, and we'll try to make a note of additional platform availability. In addition, many Mac and Linux user are likely already aware of many of these applications. | Anibit staff tends to lean toward Microsoft Windows Desktops, and so this list may have somewhat of a bias, but many of the listed software is cross-platform, and we'll try to make a note of additional platform availability. In addition, many Mac and Linux user are likely already aware of many of these applications. | ||
| + | |||
| + | And now, on to the list... | ||
| ===== Document and General File Management ===== | ===== Document and General File Management ===== | ||
| Line 13: | Line 16: | ||
| ==== SciTe ==== | ==== SciTe ==== | ||
| + | |||
| + | {{page>maker:reviews:scite&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| http://www.scintilla.org/SciTE.html | http://www.scintilla.org/SciTE.html | ||
| - | [Win | Linux]((There is a non-free version for Mac)) | + | {{:windows.jpg}} {{:linux.jpg}} ((There is a non-free version for Mac)) |
| ==== 7-Zip ==== | ==== 7-Zip ==== | ||
| - | http://www.7-zip.org/ | + | {{page>maker:reviews:7_zip&nodate&nouser&noheader&indent&firstseconly&nocomments}} |
| - | [Win] | ||
| ==== Hex Edit ==== | ==== Hex Edit ==== | ||
| - | http://www.hexedit.com/ | ||
| - | [Win] | + | {{page>maker:reviews:hexedit&nodate&nouser&noheader&indent&firstseconly&nocomments}} |
| + | http://www.hexedit.com/ | ||
| + | |||
| + | {{:windows.jpg}} | ||
| ===== Graphics Editors ===== | ===== Graphics Editors ===== | ||
| ==== The Gimp ==== | ==== The Gimp ==== | ||
| - | http://www.gimp.org/ | ||
| - | [Win | Mac | Linux] | + | {{page>maker:reviews:thegimp&nodate&nouser&noheader&indent&firstseconly&nocomments}} |
| ==== Inkscape ==== | ==== Inkscape ==== | ||
| - | http://www.inkscape.org/ | ||
| - | [Win | Mac | Linux] | + | {{page>maker:reviews:inkscape&nodate&nouser&noheader&indent&firstseconly&nocomments}} |
| ==== Paint.Net ==== | ==== Paint.Net ==== | ||
| + | |||
| + | {{page>maker:reviews:paintdotnet&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.getpaint.net/ | http://www.getpaint.net/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ==== Blender 3D ==== | ==== Blender 3D ==== | ||
| + | |||
| + | {{page>maker:reviews:blender3d&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.blender.org/ | http://www.blender.org/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ==== MeshLab ==== | ==== MeshLab ==== | ||
| + | |||
| + | {{page>maker:reviews:meshlab&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://meshlab.sourceforge.net/ | http://meshlab.sourceforge.net/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ===== Physical Modeling ===== | ===== Physical Modeling ===== | ||
| ==== Libre Cad ==== | ==== Libre Cad ==== | ||
| + | |||
| + | {{page>maker:reviews:librecad&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://librecad.org/cms/home.html | http://librecad.org/cms/home.html | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| + | |||
| + | ==== Open SCAD ==== | ||
| + | |||
| + | {{page>maker:reviews:openscad&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| - | ==== Open SCAD ==== | ||
| http://www.openscad.org/ | http://www.openscad.org/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ==== FreeCAD ==== | ==== FreeCAD ==== | ||
| - | http://freecadweb.org/ | ||
| - | [Win | Mac | Linux] | + | {{page>maker:reviews:freecad&nodate&nouser&noheader&indent&firstseconly&nocomments}} |
| ===== CAM ===== | ===== CAM ===== | ||
| ==== HeeksCNC ==== | ==== HeeksCNC ==== | ||
| - | http://heekscnc.blogspot.com/2014/03/heekscnc-10.html | ||
| - | [Win] | + | {{page>maker:reviews:heekscnc&nodate&nouser&noheader&indent&firstseconly&nocomments}} |
| + | |||
| + | http://heekscnc.blogspot.com/2014/03/heekscnc-10.html ((You can buy the Windows binary, or build it yourself. HeeksCNC is a nice piece of software, please consider purchasing it.)) | ||
| + | |||
| + | {{:windows.jpg}} {{:linux.jpg}} | ||
| ==== OpenScad ==== | ==== OpenScad ==== | ||
| + | |||
| + | {{page>maker:reviews:openscad&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.openscad.org/ | http://www.openscad.org/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ==== Slicer ==== | ==== Slicer ==== | ||
| + | |||
| + | {{page>maker:reviews:slicer&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| http://slic3r.org/ | http://slic3r.org/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| Line 97: | Line 125: | ||
| ==== Eagle ==== | ==== Eagle ==== | ||
| + | |||
| + | {{page>maker:reviews:eagle&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.cadsoftusa.com/eagle-pcb-design-software/product-overview | http://www.cadsoftusa.com/eagle-pcb-design-software/product-overview | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ==== KiCad ==== | ==== KiCad ==== | ||
| + | |||
| + | {{page>maker:reviews:kicad&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.kicad-pcb.org/ | http://www.kicad-pcb.org/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ==== LTSpice ==== | ==== LTSpice ==== | ||
| + | |||
| + | {{page>maker:reviews:ltspice&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.linear.com/designtools/software/ | http://www.linear.com/designtools/software/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ==== Fritzing ==== | ==== Fritzing ==== | ||
| + | |||
| + | {{page>maker:reviews:fritzin&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://fritzing.org/home/ | http://fritzing.org/home/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ===== Software Development Environments ===== | ===== Software Development Environments ===== | ||
| ==== Microsoft Visual Studio Express ==== | ==== Microsoft Visual Studio Express ==== | ||
| + | |||
| + | {{page>maker:reviews:visualstudio&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.visualstudio.com/en-us/products/visual-studio-express-vs.aspx | http://www.visualstudio.com/en-us/products/visual-studio-express-vs.aspx | ||
| - | [Win] | + | {{:windows.jpg}} |
| ==== Python Tools for Visual Studio ==== | ==== Python Tools for Visual Studio ==== | ||
| + | |||
| + | {{page>maker:reviews:ptvs&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://pytools.codeplex.com/ | http://pytools.codeplex.com/ | ||
| - | [Win] | + | |
| + | {{:windows.jpg}} | ||
| ==== Eclipse/CDT ==== | ==== Eclipse/CDT ==== | ||
| + | |||
| + | {{page>maker:reviews:eclipse&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.eclipse.org/ | http://www.eclipse.org/ | ||
| http://www.eclipse.org/cdt/ | http://www.eclipse.org/cdt/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ==== Atmel Studio ==== | ==== Atmel Studio ==== | ||
| + | |||
| + | {{page>maker:reviews:atmelstudio&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.atmel.com/tools/atmelstudio.aspx | http://www.atmel.com/tools/atmelstudio.aspx | ||
| - | [Win] | + | {{:windows.jpg}} |
| ==== ARM tools for Eclipse ==== | ==== ARM tools for Eclipse ==== | ||
| + | |||
| + | {{page>maker:reviews:armtoolsforeclipse&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://sourceforge.net/projects/gnuarmeclipse/ | http://sourceforge.net/projects/gnuarmeclipse/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| Line 148: | Line 204: | ||
| ==== Microsoft Mathematics ==== | ==== Microsoft Mathematics ==== | ||
| + | |||
| + | {{page>maker:reviews:microsoftmathematics&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| + | |||
| http://www.microsoft.com/en-us/download/details.aspx?id=15702 | http://www.microsoft.com/en-us/download/details.aspx?id=15702 | ||
| - | [Win] | + | {{:windows.jpg}} |
| ==== Octave ==== | ==== Octave ==== | ||
| + | |||
| + | {{page>maker:reviews:octave&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| + | |||
| http://www.gnu.org/software/octave/ | http://www.gnu.org/software/octave/ | ||
| - | [Win | Mac | Linux]((versions for FreeBSD and OpenBSD available too)) | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} ((versions for FreeBSD and OpenBSD available too)) |
| ==== wxMaxima ==== | ==== wxMaxima ==== | ||
| + | |||
| + | {{page>maker:reviews:wxmaxima&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| + | |||
| http://sourceforge.net/projects/wxmaxima/ | http://sourceforge.net/projects/wxmaxima/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| Line 167: | Line 235: | ||
| ==== PovRay ==== | ==== PovRay ==== | ||
| + | |||
| + | {{page>maker:reviews:povray&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://www.povray.org/ | http://www.povray.org/ | ||
| - | [Win] ((Mac version in the works, according to their site)) | + | {{:windows.jpg}}((Mac version in the works, according to their site)) |
| ==== Audacity ==== | ==== Audacity ==== | ||
| + | |||
| + | {{page>maker:reviews:audacity&nodate&nouser&noheader&indent&firstseconly&nocomments}} | ||
| + | |||
| http://audacity.sourceforge.net/ | http://audacity.sourceforge.net/ | ||
| - | [Win | Mac | Linux] | + | {{:windows.jpg}} {{:linux.jpg}} {{:osx.jpg}} |
| ~~DISCUSSION~~ | ~~DISCUSSION~~ | ||
maker/listofsoftwareformakers.1401151146.txt.gz · Last modified: 2014/05/27 00:39 by Anibit
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
